Formwork sapcer consisting of tie rod sleeve 22/26 mm cut to length and cone 22 mm with fitting length 10 mm. Cone bulk packed, not mounted. Supplied with plug. Special lengths on request.
Formwork spacer OKTAGON® for tie rods Ø 15/17 mm. Supplied as a set: Each form work spacer includes two OKTAGON® plugs. Resistant to acids and alkalis commonly used in construction. For exposed concrete only limited suitable, for requirements on exposed concrete we recommend our formwork sapcer OKTAGON®-PLUS. Special lengths on request. Test certificates available: - Watertightness test - Fire behaviour F180 - Airborne sound insulation - Aggressive, chemical, poluted water - Chlorine demand pursuant
OKTAGON® plastic cone for the self-production of watertight formwork spacers. By cutting a 22/26 mm plastic tube 8 cm shorter than the required wall thickness and pressing on the cone, lengths with the properties of OKTAGON® can be produced.
Formwork spacer OKTAGON®-PLUS 22 for tie rods Ø 15/17 mm. Supplied as a set: Each form work spacer includes two OKTAGON® plugs. Resistant to acids and alkalis commonly used in construction. Special lengths on request. Test certificates available: - Watertightness test - Fire behaviour F180 - Airborne sound insulation - Aggressive, chemical, poluted water - Chlorine demand pursuant
OKTAGON®-PLUS 22 plastic cone for the self-production of watertight formwork spacers. By cutting a 22/26 mm plastic tube 8 cm shorter than the required wall thickness and pressing on the cone, lengths with the properties of OKTAGON®-PLUS 22 can be produced.
Linear, labour-saving plastic spacers for lower reinforcement. The cut-outs ensure proper flow of the concrete without compromising stability and at the same time reduce the visibility of the spacer on the finished concrete surface.
Linear, labour-saving plastic spacers for lower reinforcement for all applications where the reinforcement has to be set against soft surfaces, e.g. insulation boards. For this purpose, the Drunterleiste is placed with the flat side on the insulation. With holes on the sides for better concrete flow without affecting stability.
Linear, labour-saving plastic spacers for lower reinforcement for all applications where the reinforcement has to be set against soft surfaces, e.g. insulation boards. For this purpose, the Drunterleiste is placed with the flat side on the insulation.
Linear, labour-saving plastic spacers for lower reinforcement with grid notches. The grid notches prevent the first reinforcement layer from slipping. The cut-outs ensure proper flow of the concrete without compromising stability and at the same time reduce the visibility of the spacer on the finished concrete surface.