It is APP (Atactic Polypropylene) modified, torch-on plastomeric waterproofing membranes with fiberglass or non-woven spunbond polyester felt; both sides are coated with polyethylene film or one side coated with polyethylene film, the other side is coated with silica sand, aluminum foil or natural or colored slate chippings (mineral stones). Fields of Application It is used in curtain walls, foundations, and projects with high tensile requirements, basement walls, balconies, terrace roofs, inclined roofs, water tanks, manmade ponds, retaining walls, concrete channels as well as bathrooms and any wet surfaces.
Universal panels of our systems Master and 2000 for the forming of square and rectangular columns.
Sealing Connector 15mm with closing strip The Sealing Connector with closing strip is the perfect solution for heavy-duty concrete structures where formwork tie bars remain in situ. The Sealing Connector is made from synthetic, water-swellable rubber that prevents moisture infiltration fully. Slide these Sealing Connectors over the tie rod and anchor using the closing strip. Fast and easy.
The Sealing UFO is the perfect solution for combating water infiltration around formwork spacers and surrounding concrete. Sealing UFOs prevent water permeating through cracks in the concrete around formwork spacers. This innovative sealing system is 100% watertight, quick and easy to install, and available in a wide range of sizes.
The Sealing Plug is a revolutionary solution for sealing structural concrete formwork spacers. Sealing Plugs comprise a water-swellable rubber cap and solid core. The cap prevents water infiltrating the bar and the core provides a mechanical anchor under water pressures up to 6 bar. This water-activated, self-expanding sealing solution is one of our most innovative – it guarantees a perfect seal, combating moisture infiltration with a single hammer blow!
The BeSealed® closing strip is the perfect solution for sealing pvc formwork spacers. This closing strip swells automatically in the presence of water, waterproofing the concrete cracks around the formwork spacer instantly. This new innovation of BeSealed® has no equal. Attach the closing strip with just one twist around the formwork spacer. Faster and easier than ever.
The Sealing Connector is the perfect solution for heavy-duty concrete structures where formwork tie bars remain in situ. The Sealing Connector is also made from synthetic, water-swellable rubber that prevents moisture infiltration fully. Slide the connectors over the tie rod and anchor using the Sealing UFO or Sealing Ring. Available in a wide range of sizes for use with existing standard tie bar sizes.
These come in very handy in the vertical fixing of hydrophilic profiles. Packed in boxes of 30 pcs. BeSealed® metal wire meshes can be nailed, dowelled or tacked. Suited for Bentobar+ bentonite waterstops. Our U-shaped steal wire meshes are extremely user-friendly due to their remarkably high-finishing level. No sharp cutting edges, so no hand cuts. Easy to bend.
BeSealed® Fixing Glue ensures fast and strong fixation of hydrophilic profiles to concrete. Moreover, BeSealed® Fixing glue has excellent adhesion strength, even on wet concrete surfaces. The fast skin formation and curing allows concrete casting after a few hours. BeSealed® Fixing Glue is completely weather resistant. BeSealed® Fixing Glue can easily be applied. For optimal fixation, glue must be applied on the full contact area of the hydrophilic strip. After gluing, press down the water swellable sealing bar briefly. The BeSealed® all-season glue can be applied for both Polybar+ and Bentobar+.
BeSealed® water swellable paste is a high quality, one component polyurethane adhesive which swells in contact with water. Upon contact with water, the paste can expand up to 450% of its original volume. BeSealed® water swellable paste can be applied for sealing and adhesion of both Polybar+ and Bentobar+. After application of the paste, the water swellable sealing bar needs to be pressed down, to ensure full contact with the paste underneath and to achieve optimal adhesion.
Scope of application Plaster facades Facades with decorative tiles Thermal insulation of external and internal enclosing structures Not for use in load-bearing structures!
Scope of application Roofs and coverings Walls Floors and ceilings Foundations Thermal inserts Expansion joints Beds and adjacent grounds Insulation for buried structures For use in load-bearing structures