Spacer with 4-point support made of cast concrete. With eyelet wire for attachment to the reinforcement. Due to the low contact points with the formwork, very suitable for exposed concrete.
Spacer with round support made of cast concrete. With shuttlecock clip for easy attachment to the reinforcement. The shuttlecock clip ensures a secure hold at the crossing point of the reinforcement. Excellent for exposed concrete because of only one point of contact with the formwork.
Spacer with round support made of cast concrete. With plastic clip for easy attachment to the reinforcement. Excellent for exposed concrete because of only one point of contact with the formwork.
OKTAGON® plastic cone for the self-production of watertight formwork spacers. By cutting a 22/26 mm plastic tube 8 cm shorter than the required wall thickness and pressing on the cone, lengths with the properties of OKTAGON® can be produced.
Large-area and extra strong spacer, mainly for lower reinforcement. Extra good concrete flow because of large side and top cut-outs. Only limited suitable for fair-faced concrete and prefabricated slabs. Due to the better tilting stability, we recommend Drupak "2" from a concrete cover of 40 mm. Can be extended as required with plug-in coupling, production length 1 m.
Formwork spacer OKTAGON®-PLUS 22 for tie rods Ø 15/17 mm. Supplied as a set: Each form work spacer includes two OKTAGON® plugs. Resistant to acids and alkalis commonly used in construction. Special lengths on request. Test certificates available: - Watertightness test - Fire behaviour F180 - Airborne sound insulation - Aggressive, chemical, poluted water - Chlorine demand pursuant
OKTAGON®-PLUS 22 plastic cone for the self-production of watertight formwork spacers. By cutting a 22/26 mm plastic tube 8 cm shorter than the required wall thickness and pressing on the cone, lengths with the properties of OKTAGON®-PLUS 22 can be produced.
Large-area and extra strong spacer, mainly for lower reinforcement. For all applications where the reinforcement has to be spaced against soft surfaces, e.g. insulation boards. For this purpose, the Drupak is placed with the flat side on the insulation. Extra good concrete flow because of large side and top cut-outs. Can be extended as required with plug-in coupling, production length 1 m.
Disk made of cast concrete for use with fair-faced concrete requirements. For gluing onto the OKTAGON® plug 22. Shadow gap approx. 2 mm.
OKTAGON®-PLUS exposed concrete plug 22 made of plastic for easy closure of the formwork spacer for exposed concrete requirements. Used instead of the OKTAGON®-PLUS standard plug 22. Only hammer in, do not glue! Shadow gap approx. 2 mm. Further colours on request.
Large-area spacer with high step stability for the lower reinforcement. Because of its zigzag shape and the staggered feet, a good concrete flow is guaranteed. By simply turning it over, the DRUWA can also be used on soft surfaces. Due to its special shape, the DRUWA is easily stackable. This results in optimal freight cost savings and storage space utilisation!
OKTAGON® plug 22 for tight sealing of OKTAGON®-PLUS cone 22. Only hammer in, do not glue! Easy and quick working due to the long plug. The solid design of the plug increases the safety of the system. Installation depth approx. 12 mm.
