Corrosion-free plastic anchor made of high-strength polyamide for tie rods with DYWIDAG thread 15 mm. In combination with the Sichtbetonkegel Universal ( Item No. SBKU2226GB) also suitable for fair-faced concrete. Delivery including nail plug for fair-faced concrete. Tested according to DIN 18216:2021-02, test report available on request.
Magnet for mounting the Hohlwanddübel (Item No. HWDM12) on steel formwork.
Concrete screw MULTI-MONTI®-plus SSK 16 x 130 mm hexagon head with pressed-on washer and cone, SW-24, galvanised blue, A2K for use with Hohlwanddübel-Plus (Art. No. HWDP16 and HWDPM16) and 16 x 90 mm for use with Hohlwanddübel-Plus Massivwand (Art. No. HWDPMW16 and HWDPMMW16).
Mounting set with accessories for on-site assembly of solid and double walls. Standard mounting set consisting of: - 30 MULTI-MONTI®-plus SSK 16 x 130 mm screws - 60 each of UP02, UP03, UP05, UP10, UP20 leveling shims Customised mounting sets on request.
Magnet for mounting the Hohlwanddübel-PLUS "M" (Item No. HWDPM16) or Hohlwanddübels-PLUS Massivwand "M" (Item No. HWDPMMW16) on steel formwork.
Hohlwanddübel-Plus for temporary fastening of props and corner brackets to solid walls in the assembly state. The Hohlwanddübel-Plus is positioned on the formwork at the factory using hot glue. Best possible hold due to roughened adhesive surface with Ø 50 mm. A small recess in the adhesive plate ensures minimum consumption of hot glue. Alternatively, the Hohlwanddübel can be attached to steel formwork tables with an adhesive pad (double-sided adhesive on carrier foil). Positive side effect: No more hot glue runs into the screw guide! Only the approved MULTI-MONTI®-plus SSK 16 x 90 mm concrete screw may be used for attaching the prop to the Hohlwanddübel-Plus. The adhesive plate can be easily removed through a predetermined breaking point. Supplied without screw.
A massive bracket platform for use as working-, safety- and climbing scaffold.
Closed water barrier made of cast iron for tie rods with DYWIDAG thread 15 mm. For making watertight clamping points in combination with the coupling (DIKUW22N) for tie rod sleeves Ø 22 mm.
Cast iron tie bar connector for tie rods with DYWIDAG thread 15 mm. For the force-fit connection of two tie rods.
Nail plug made of platic for exposed concrete for Gewindehülse-PLUS (Item-No. GWHP15/GH).
Hohlwanddübel-Plus for temporary fastening of props on solid walls in the assembly state. The Hohlwanddübel-Plus is positioned on the steel formwork with the reusable magnet. After stripping the formwork, the magnet usually remains on the formwork due to its high adhesive force. Only the approved MULTI-MONTI®-plus SSK 16 x 90 mm concrete screw may be used for attaching the prop to the Hohlwanddübel-Plus. Supplied without magnet, screw and washer.
Hohlwanddübel-Plus for temporary fastening of props and corner brackets on double and solid walls in the assembly state. The Hohlwanddübel-Plus is positioned on the steel formwork with the reusable magnet. After stripping the formwork, the magnet usually remains on the formwork due to its high adhesive force. Only the approved MULTI-MONTI®-plus SSK 16 x 130 mm concrete screw may be used for attaching the prop to the Hohlwanddübel-Plus. Supplied without magnet, screw and washer.
