UTC-5727.FPR and UTC-5737.FPR models Automatic Compressıon Testıng Machines are manufactured for compression testing of cubes and cylinders acc. to EN 12390-4. These machines also meet the requirements of CE norms with respect to the health and safety of the operator. The machines allow inexperienced operators to perform the test. Once the machine has been switched on and the specimen is positioned and centered by the help of fixtures or/and concentric centering lines of lower loading platen, the only required operations are; Setting test parameters, including pace rate (only required when the specimen type is changed). Main Features Pace Rate control between 1 kN to 25 kN Accuracy Class 1 acc. to EN 12390-4 starting from with the 5% of the machine capacity (Special calibration option Class 1 starting from 1% of the full range with UTC-0210) Supplied with factory calibration certificate Tests automatically with closed loop control Load measurment with a pressure transducer Multi-Point calibration function for the channels Real time numeric display of load and load pressure with test graph. Safety Features Maximum pressure valves to avoid machine overloading Limit switch for piston stroke Removable transparent front and rear safety doors Optional Additional Frame For compression and especially flexural testing, additionally second testing frame should be ordered separately. In this case, the machines provide load control of two seperate testing frames with closed-loop P.I.D control with automatic test procedure by using selecting test channel and additional selector valve. U-Touch PRO Control Unit UTC-4930.FPR is designed to perform automatically compression, flexure and splitting tensile strength tests of construction materials such as concrete, cement mortar, masonary units/blocks by controlling the Utest automatic compression / flexure testing machines. All the operations of U-Touch PRO are controlled from the front panel touch screen display. U-Touch PRO Control Unit has easy to use menu options. It displays all menu option listings simultaneously, allowing the operator to access the required option in a seemless manner to activate the option or enter a numeric value to set the test parameters. Digital graphic display is able to draw real-time "Load vs. Time", or "Stress vs. Time" graphics UTEST Software for Automatic Compression / Flexure Testing Machines UTEST software USOFT-4830.FPR provides to perform automatically compression, flexure and splitting tensile strength tests of construction materials such as concrete, cement mortar, masonary units/blocks by controlling the Utest automatic compression / flexure testing machines The advantages of performing tests on computer with using UTEST Software, such as reporting, graphical output, etc. can be seen in detail at the pages of UTEST Software for Automatic Compression / Flexure Testing Machines. EN 12390-4 AUTOMATIC COMPRESSION TESTING MACHINES The machines for cubes and cylinders are supplied complete with; • • Fixture for centering specimens, compatible with Ø300 mm lower loading platen for 100 mm and 150 mm cubes, Ø100 mm and Ø150 mm cylinders (UTC-4622E) • Removable transparent front and rear safety doors
UTC-5729.FPR and UTC-5739.FPR models Automatic Compressıon Testıng Machines are manufactured for compression testing of masonary units, cubes and cylinders acc. to EN standards .These machines also meet the requirements of CE norms with respect to the health and safety of the operator. The machines allow inexperienced operators to perform the test. Once the machine has been switched on and the specimen is positioned and centered by the help of fixtures or/and concentric centering lines of lower loading platen, the only required operations are; Setting test parameters, including pace rate (only required when the specimen type is changed). The Machines consist of a welded steel frame (see table) and UTC-4830FPR automatic hydraulic power pack with U-Touch PRO Control Unit. Main Features Pace Rate control between 1 kN to 25 kN Accuracy Class 1 acc. to EN 12390-4 starting from with the 5% of the machine capacity (Special calibration option Class 1 starting from 1% of the full range with UTC-0210) Supplied with factory calibration certificate for force transfer stability and the self-alignment of the upper loading platen conforming to EN 12390-4 Tests automatically with closed loop control The tests can be performed by controlling the machine either on U-Touch PRO control unit (UTC-4930.FPR) or on a computer with using free UTEST Software (USOFT-4830.FPR) which is provided free of charge with the machines. Load measurment with a pressure transducer Hydraulic pump with dual stage for rapid approach Welded steel walled frame with a single acting piston Piston return at the end of test automatically U-Touch PRO Control Unit U-Touch PRO Control Unit UTC-4930.FPR is designed to perform automatically compression, flexure and splitting tensile strength tests of construction materials such as concrete, cement mortar, masonary units/blocks by controlling the Utest automatic compression / flexure testing machines. All the operations of U-Touch PRO are controlled from the front panel touch screen display. U-Touch PRO Control Unit has easy to use menu options. It displays all menu option listings simultaneously, allowing the operator to access the required option in a seemless manner to activate the option or enter a numeric value to set the test parameters. Digital graphic display is able to draw real-time "Load vs. Time", or "Stress vs. Time" graphics UTEST Software for Automatic Compression / Flexure Testing Machines UTEST software USOFT-4830.FPR provides to perform automatically compression, flexure and splitting tensile strength tests of construction materials such as concrete, cement mortar, masonary units/blocks by controlling the Utest automatic compression / flexure testing machines. The advantages of performing tests on computer with using UTEST Software, such as reporting, graphical output, etc. can be seen in detail at the pages of UTEST Software for Automatic Compression / Flexure Testing Machines. Optional Additional Frame For compression and especially flexural testing, additionally second testing frame should be ordered separately. In this case, the machines provide load control of two seperate testing frames with closed-loop P.I.D control with automatic test procedure by using selecting test channel And additional selector valve. Safety Features Maximum pressure valves to avoid machine overloading Limit switch for piston stroke Emergency stop button Removable transparent front and rear safety doors Software controlled maximum load value EN 12390-4 and EN 772-1 COMPRESSION TESTING (d*) depth (**) Limited by capacity of the frame The machines for masonary units, cubes and cylindrs are supplied complete with; • • • • Removable transparent front and rear safety doors Appropriate Distance piece/s for the cylinder and cube specimens with the height of lower than 150 mm should be ordered separately.
The UTCM-0930 Vibrating Machine is used for the preparation and compaction of 70.7 mm mortar cube specimens. The mould table is mounted on four springs attached to an eccentric shaft which allows each sample to be vibrated at 12000 cycles per minute. There is a timer on it to preset time and it stops automatically in every 120 seconds. 70.7 mm cube mould (UTCM-0926) should be ordered separately.
Distance Pieces for Frame Due to the modular design of the frames any sample with suitable size, load and pace rate can be test on both chambers by decreasing the distance between platens. Loading Platens UTCM-4116 Lower and Upper (spherical seated) Loading Platens are manufactured from high quality steel smoothed and finished. The roughness value for the surface texture of machine and auxiliary platens are 3.2 μm.
UTC-6729.FPR, UTC-6739.FPR, UTC-6749.FPR and UTC-6759.FPR models Automatic Compressıon Testıng Machines are manufactured for compression testing of masonary units, cubes and cylinders acc. to EN standards .These machines also meet the requirements of CE norms with respect to the health and safety of the operator. The machines allow inexperienced operators to perform the test. Once the machine has been switched on and the specimen is positioned and centered by the help of fixtures or/and concentric centering lines of lower loading platen, the only required operations are; Setting test parameters, including pace rate (only required when the specimen type is changed). The Machines consist of a welded steel frame (see table) and UTC-4830FPR automatic hydraulic power pack with U-Touch PRO Control Unit. UTC-4684 and UTC-4886 Pedestals that are made of steel to facilitate the user’s placement of specimens in the machines for compression test should be ordered separately. Main Features Pace Rate control between 1 kN to 25 kN Accuracy Class 1 acc. to EN 12390-4 starting from with the 5% of the machine capacity (Special calibration option Class 1 starting from 1% of the full range with UTC-0210) Supplied with factory calibration certificate for force transfer stability and the self-alignment of the upper loading platen conforming to EN 12390-4 Tests automatically with closed loop control The tests can be performed by controlling the machine either on U-Touch PRO control unit (UTC-4930.FPR) or on a computer with using free UTEST Software (USOFT-4830.FPR) which is provided free of charge with the machines. Load measurment with a pressure transducer Hydraulic pump with dual stage for rapid approach Welded steel walled frame with a single acting piston Piston return at the end of test automatically U-Touch PRO Control Unit U-Touch PRO Control Unit UTC-4930.FPR is designed to perform automatically compression, flexure and splitting tensile strength tests of construction materials such as concrete, cement mortar, masonary units/blocks by controlling the Utest automatic compression / flexure testing machines. All the operations of U-Touch PRO are controlled from the front panel touch screen display. U-Touch PRO Control Unit has easy to use menu options. It displays all menu option listings simultaneously, allowing the operator to access the required option in a seemless manner to activate the option or enter a numeric value to set the test parameters. Digital graphic display is able to draw real-time "Load vs. Time", or "Stress vs. Time" graphics PLEASE see the pages of “U-Touch PRO Control Unit for Automatic Compression/Flexure Testing Machines” for details of the properties. UTEST Software for Automatic Compression / Flexure Testing Machines UTEST software USOFT-4830.FPR provides to perform automatically compression, flexure and splitting tensile strength tests of construction materials such as concrete, cement mortar, masonary units/blocks by controlling the Utest automatic compression / flexure testing machines. The advantages of performing tests on computer with using UTEST Software, such as reporting, graphical output, etc. can be seen in detail at the pages of UTEST Software for Automatic Compression / Flexure Testing Machines. Optional Additional Frame For compression and especially flexural testing, additionally second testing frame should be ordered separately. In this case, the machines provide load control of two seperate testing frames with closed-loop P.I.D control with automatic test procedure by using selecting test channel And additional selector valve. Safety Features Maximum pressure valves to avoid machine overloading Limit switch for piston stroke Emergency stop button Removable transparent front and rear safety doors Software controlled maximum load value • • • • Appropriate distance piece/s for the cylinder and cube specimens with the height of lower than 150 mm should be ordered separately for UTC-6729.FPR and UTC-6739.FPR
UTCM-1100 Curing Cabinet, 1000 Liters, for cement based mortar specimens, 20.0 ± 1.0°C temperature and over 90% Rh humidity. The humidity and temperature can be controlled and monitored by a digital unit. Stainless steel interior. 220-240V, 50-60Hz, 1ph. The humidity and temperature can be controlled and monitored on the digital control unit. UTCM-1100 Curing Cabinet is also supplied complete with six displaceable shelves.
UTC-6727.FPR, UTC-6737.FPR UTC-6747.FPR and UTC-6757.FPR models Automatic Four Column Compressıon Testıng Machines are manufactured for compression testing of cubes and cylinders acc. to EN. These machines also meet the requirements of CE norms with respect to the health and safety of the operator. The machines allow inexperienced operators to perform the test. Once the machine has been switched on and the specimen is positioned and centered by the help of fixtures or/and concentric centering lines of lower loading platen, the only required operations are; Setting test parameters, including pace rate (only required when the specimen type is changed). The Machines consist of a welded steel frame (see table) and UTC-4830FPR automatic hydraulic power pack with U-Touch PRO Control Unit. Main Features Pace Rate control between 1 kN to 25 kN Accuracy Class 1 acc. to EN 12390-4 starting from with the 5% of the machine capacity (Special calibration option Class 1 starting from 1% of the full range with UTC-0210) Supplied with factory calibration certificate for force transfer stability and the self-alignment of the upper loading platen conforming to EN 12390-4 Tests automatically with closed loop control Load measurment with a pressure transducer U-Touch PRO Control Unit for Automatic Compression / Flexure Testing Machines U-Touch PRO Control Unit UTC-4930.FPR is designed to perform automatically compression, flexure and splitting tensile strength tests of construction materials such as concrete, cement mortar, masonary units/blocks by controlling the Utest automatic compression / flexure testing machines. All the operations of U-Touch PRO are controlled from the front panel touch screen display. U-Touch PRO Control Unit has easy to use menu options. It displays all menu option listings simultaneously, allowing the operator to access the required option in a seemless manner to activate the option or enter a numeric value to set the test parameters. Digital graphic display is able to draw real-time "Load vs. Time", or "Stress vs. Time" graphics UTEST Software for Automatic Compression / Flexure Testing Machines UTEST software USOFT-4830.FPR provides to perform automatically compression, flexure and splitting tensile strength tests of construction materials such as concrete, cement mortar, masonary units/blocks by controlling the Utest automatic compression / flexure testing machines The advantages of performing tests on computer with using UTEST Software, such as reporting, graphical output, etc. can be seen in detail at the pages of UTEST Software for Automatic Compression / Flexure Testing Machines. Optional Additional Frame For compression and especially flexural testing, additionally second testing frame should be ordered separately. In this case, the machines provide load control of two seperate testing frames with closed-loop P.I.D control with automatic test procedure by using selecting test channel And additional selector valve. Safety Features Maximum pressure valves to avoid machine overloading Limit switch for piston stroke Emergency stop button Removable transparent front and rear safety doors Software controlled maximum load value
Jolting Table is used for compacting of cement specimens in 40x40x160 mm mould and consists of mould table seated on a rotating cam driven at 60 r.p.m. The falling height is 15 mm conforming to EN 196-1. The machine is equipped with a counter which provides automatic shut off at end of preset drop numbers. Weight and dimensions of the jolting table fully comply with the requirements of EN 196-1 standard. When used with UTCM-0892 Three Gang Mould and UTCM-0893 Feed Hopper, the total weight of the moving part is 20 kg ± 0.5 kg. Without UTCM-0892 and UTCM-0893 the weight of the moving parts is 6.85 kg. Rapid mould lock and release system allows easy and quick operation. The supporting frame of the machine has been designed to ensure precise dimensions, table flatness, correct centering of the three gang mould on the table. The motor and gearbox assembly is enclosed in a protective housing, which promotes user safety (the moving parts are inaccessible) and long life for the gearbox. The standard model can be supplied with a safety/noise reduction cabinet. The cabinet is lined internally with soundproofing material to reduce sound level conforming to CE directives. UTCM-0893 Feed Hopper is used for filling UTCM-0892 Three Gang Moulds placed on the Jolting Table. UTCM-0892 Three Gang Mould, UTCM-0893 Feed Hopper, UTCM-0894 Short and Long Spreaders and Straightedge should be ordered separately.
The apparatus is used for determining the stiffening time of repair products and systems comprising hydraulic based mortar and concrete (CC), including those modified by the addition of polymers (PCC) and workable life of fresh mortar after the mixing procedures. The Apparatus consist of a vertical loading pillar with a base. Supplied complete with a brass penetration rod with washer and a sample container (Ø80x80 mm aluminum). UTC-0705 Needle Set for concrete setting time test acc.to ASTM should be ordered separately UTW-0637 Digital Balance for the initial setting time, workable life and stıffening time should be ordered separately, as well. Also, for determining concrete final setting time, instead of UTW-0637, UTW-0654 should be ordered separately.
There are two models of the Cement Flow Table according to ASTM and EN standard. Both are used for determining the consistency of mortar, lime and cement specimens. Also manual and motorized models are available. The hand operated model is fitted with a hand wheel. The motor operated model is driven by a motor speed reducer through a mechanical coupling at the rate of 1 revolution per second. The number of drops is preset on a counter and the machine stops automatically at the end of the cycle. EN model, the table is manufactured from stainless steel and has a 300 mm diameter table. The conical mould is made of stainless steel and has dimensions of 100 mm base dia. x 70 mm top dia. x 60 mm height. ASTM model; the table is manufactured from bronze and has 254 mm diameter. The conical mould is made of brass has dimensions of 100 mm base dia. X 70 mm top dia. X 50 mm height. Both models are supplied complete with stainless steel flow mould and tamper. EN model also has a stainless steel hopper.
All moulds have been manufactured from steel except UTCM-0898 molded using engineered plastic and all internal surfaces are machined. Minimum surface hardness of UTCM- 0892.4 is HV400 which is recommended by the EN standard. All moulds surfaces are protected with anti-corrosion oil. The webs of UTCM- 0892.4 and UTCM-0899A are matchmarked. Minimum surface hardness of UTCM-0892.2 is HV200.
The UTCM-3722 and UTCM-3742, very rigid two column frames have been designed for compression and/or flexure testing of mortar prisms and cubes specimens. Load cells are used on both frames to provide high accuracy in load measuring. Both frames are fitted with round platens with 165 mm diameter and these should be used together with suitable flexure and compression devices. Distance pieces and transparent front-rear safety doors (should be factory insttalled) should be ordered separately. Loading Cylinder Assembly & Limit Switch All frames have a single acting up stroking ram. The diameter of piston changes with regard to the capacity. The maximum ram stroke is 20 mm, a limit switch is fitted to prevent over travel of the ram which cuts the power to the pump. There is a low friction coaxial bronze seal between the cylinder and the piston fitted to the cylinder.
